Solution Description
Tractor fitted Backhoe Loader
Product |
BH-five |
BH-6 |
BH-7 |
BH-eight |
BH-nine |
BH-ten |
BH-twelve |
Fitting power |
fifteen-25hp |
twenty five-35 hp |
35-75 hp |
forty five-85hp |
fifty-100hp |
70-125hp |
eighty-150hp |
Max. CZPT depth |
1650 mm |
1850 mm |
2150 mm |
2640 mm |
2900 mm |
3000 mm |
3500 mm |
Digging depth Flat bottom |
1450 mm |
1600 mm |
2000 mm |
2500 mm |
2760 mm |
2800 mm |
3350 mm |
Max. CZPT peak |
2100 mm |
2500 mm |
3400 mm |
3510 mm |
3900 mm |
4000 mm |
4300 |
Loading heigh |
1300 mm |
1400 mm |
1760 mm |
2000 mm |
2362 mm |
2337 mm |
2700 |
Unloading heigh |
1530 mm |
1733 mm |
1878 mm |
1952 mm |
2413 mm |
2540 mm |
2770 |
Max. CZPT radius |
2300 mm |
2800 mm |
3360 mm |
3930 mm |
3977 mm |
3886 mm |
4300 |
Bucket rofation (°) |
160° |
160° |
160° |
160° |
160° |
160° |
172° |
Swing angle (°) |
160° |
160° |
160° |
160° |
160° |
160° |
180° |
Valve standard press |
sixteen Mpa |
sixteen Mpa |
sixteen Mpa |
16 Mpa |
sixteen Mpa |
16 Mpa |
sixteen Mpa |
Bucket width |
260 mm |
three hundred mm |
four hundred mm |
450 mm |
480 mm |
500 mm |
550 mm |
Bucket volume |
.571 m3 |
.03 m3 |
.036 m3 |
.048 m3 |
.054 m3 |
.06 m3 |
.07 m3 |
Excess weight |
340 kgs |
520 kgs |
550 kgs |
610 kgs |
720 kgs |
850 kgs |
930 kgs |
Major Functions
1.Matched any tractor .
two.The pump mixed with increasing velocity gearbox and link PTO shaft immediately.
3.3-level hitched backhoe,steady structure.
four.With hydraulic pump/oil tank/gauge and thumb on boom.
five.Claw on boom, handed manage valve.
6.Luxurious spring seat and basic safety belt.
seven.Optional buckets.
eight.Can be used for backyard CZPT and design digging.
Main Performance
one) Matching twenty-160HP, 4wd Tractor
2). PTO and Thumb
3). Numerous Buckets: 200-1200mm width
4). Use hydraulic transmission, compact construction, extremely standardized hydraulic components
five). PTO system including: Gear pump, transfer, oil tank, vitta, ect.
six). Versatility, convenient procedure, fast mounting and dismounting
Unique Discover
1). It is employed for ditching in farms and grazing lands, CZPT pool, cleaning waterways as nicely as assistant excavating perform in construction and constructing streets.
2). Hydraulic transmission is used, featured with compact composition, flexibility, practical procedure and fast mounting and dismounting. It employs hydraulic oil frequently with tractor. The hydraulic factors are standardized, handy for operation and service.
3). To better accomplish different types of work, buckets of distinct sizes can be chosen and mounted on it.
All tractor which attached 3 piont hitch, PTO Shaft that can mounted on our self hydraulic method model backhoe.
All tractor which connected 3 point hitch, hydraulic output that can mounted on our typical design backhoe.
US $2,360-2,680 / Piece | |
2 Pieces (Min. Order) |
###
After-sales Service: | Online |
---|---|
Warranty: | 1 Year |
Type: | Backhoe Loader |
Usage: | Special Excavator |
Bucket: | Backhoe |
Transmission: | Mechanical Transmission |
###
Customization: |
Available
|
---|
###
Model
|
BH-5
|
BH-6
|
BH-7
|
BH-8
|
BH-9
|
BH-10
|
BH-12
|
Fitting power
|
15-25hp
|
25-35 hp
|
35-75 hp
|
45-85hp
|
50-100hp
|
70-125hp
|
80-150hp
|
Max. digging depth
|
1650 mm
|
1850 mm
|
2150 mm
|
2640 mm
|
2900 mm
|
3000 mm
|
3500 mm
|
Digging depth Flat bottom
|
1450 mm
|
1600 mm
|
2000 mm
|
2500 mm
|
2760 mm
|
2800 mm
|
3350 mm
|
Max. digging height
|
2100 mm
|
2500 mm
|
3400 mm
|
3510 mm
|
3900 mm
|
4000 mm
|
4300
|
Loading heigh
|
1300 mm
|
1400 mm
|
1760 mm
|
2000 mm
|
2362 mm
|
2337 mm
|
2700
|
Unloading heigh
|
1530 mm
|
1733 mm
|
1878 mm
|
1952 mm
|
2413 mm
|
2540 mm
|
2770
|
Max. digging radius
|
2300 mm
|
2800 mm
|
3360 mm
|
3930 mm
|
3977 mm
|
3886 mm
|
4300
|
Bucket rofation (°)
|
160°
|
160°
|
160°
|
160°
|
160°
|
160°
|
172°
|
Swing angle (°)
|
160°
|
160°
|
160°
|
160°
|
160°
|
160°
|
180°
|
Valve standard press
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
Bucket width
|
260 mm
|
300 mm
|
400 mm
|
450 mm
|
480 mm
|
500 mm
|
550 mm
|
Bucket volume
|
0.028 m3
|
0.03 m3
|
0.036 m3
|
0.048 m3
|
0.054 m3
|
0.06 m3
|
0.07 m3
|
Weight
|
340 kgs
|
520 kgs
|
550 kgs
|
610 kgs
|
720 kgs
|
850 kgs
|
930 kgs
|
US $2,360-2,680 / Piece | |
2 Pieces (Min. Order) |
###
After-sales Service: | Online |
---|---|
Warranty: | 1 Year |
Type: | Backhoe Loader |
Usage: | Special Excavator |
Bucket: | Backhoe |
Transmission: | Mechanical Transmission |
###
Customization: |
Available
|
---|
###
Model
|
BH-5
|
BH-6
|
BH-7
|
BH-8
|
BH-9
|
BH-10
|
BH-12
|
Fitting power
|
15-25hp
|
25-35 hp
|
35-75 hp
|
45-85hp
|
50-100hp
|
70-125hp
|
80-150hp
|
Max. digging depth
|
1650 mm
|
1850 mm
|
2150 mm
|
2640 mm
|
2900 mm
|
3000 mm
|
3500 mm
|
Digging depth Flat bottom
|
1450 mm
|
1600 mm
|
2000 mm
|
2500 mm
|
2760 mm
|
2800 mm
|
3350 mm
|
Max. digging height
|
2100 mm
|
2500 mm
|
3400 mm
|
3510 mm
|
3900 mm
|
4000 mm
|
4300
|
Loading heigh
|
1300 mm
|
1400 mm
|
1760 mm
|
2000 mm
|
2362 mm
|
2337 mm
|
2700
|
Unloading heigh
|
1530 mm
|
1733 mm
|
1878 mm
|
1952 mm
|
2413 mm
|
2540 mm
|
2770
|
Max. digging radius
|
2300 mm
|
2800 mm
|
3360 mm
|
3930 mm
|
3977 mm
|
3886 mm
|
4300
|
Bucket rofation (°)
|
160°
|
160°
|
160°
|
160°
|
160°
|
160°
|
172°
|
Swing angle (°)
|
160°
|
160°
|
160°
|
160°
|
160°
|
160°
|
180°
|
Valve standard press
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
16 Mpa
|
Bucket width
|
260 mm
|
300 mm
|
400 mm
|
450 mm
|
480 mm
|
500 mm
|
550 mm
|
Bucket volume
|
0.028 m3
|
0.03 m3
|
0.036 m3
|
0.048 m3
|
0.054 m3
|
0.06 m3
|
0.07 m3
|
Weight
|
340 kgs
|
520 kgs
|
550 kgs
|
610 kgs
|
720 kgs
|
850 kgs
|
930 kgs
|
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by czh 2022-12-26