China PTO Driven Tractor Backhoe pto shaft bearing

Solution Description

Tractor fitted Backhoe Loader
 

Product

BH-five

BH-6

BH-7

BH-eight

BH-nine

BH-ten

BH-twelve

Fitting power

fifteen-25hp

twenty five-35 hp

35-75 hp

forty five-85hp

fifty-100hp

70-125hp

eighty-150hp

Max. CZPT depth

1650 mm

1850 mm

2150 mm

2640 mm

2900 mm

3000 mm

3500 mm

Digging depth Flat bottom

1450 mm

1600 mm

2000 mm

2500 mm

2760 mm

2800 mm

3350 mm

Max. CZPT peak

2100 mm

2500 mm

3400 mm

3510 mm

3900 mm

4000 mm

4300

Loading heigh

1300 mm

1400 mm

1760 mm

2000 mm

2362 mm

2337 mm

2700

Unloading heigh

1530 mm

1733 mm

1878 mm

1952 mm

2413 mm

2540 mm

2770

Max. CZPT radius

2300 mm

2800 mm

3360 mm

3930 mm

3977 mm

3886 mm

4300

Bucket rofation (°)

160°

160°

160°

160°

160°

160°

172°

Swing angle (°)

160°

160°

160°

160°

160°

160°

180°

Valve standard press

sixteen Mpa

sixteen Mpa

sixteen Mpa

16 Mpa

sixteen Mpa

16 Mpa

sixteen Mpa

Bucket width

260 mm

three hundred mm

four hundred mm

450 mm

480 mm

500 mm

550 mm

Bucket volume

.571 m3

.03 m3

.036 m3

.048 m3

.054 m3

.06 m3

.07 m3

Excess weight

340 kgs

520 kgs

550 kgs

610 kgs

720 kgs

850 kgs

930 kgs

Major Functions
1.Matched any tractor .
two.The pump mixed with increasing velocity gearbox and link PTO shaft immediately.
3.3-level hitched backhoe,steady structure.
four.With hydraulic pump/oil tank/gauge and thumb on boom.
five.Claw on boom, handed manage valve.
6.Luxurious spring seat and basic safety belt.
seven.Optional buckets.
eight.Can be used for backyard CZPT and design digging.

Main Performance 
one) Matching twenty-160HP, 4wd Tractor
2). PTO and Thumb
3). Numerous Buckets: 200-1200mm width
4). Use hydraulic transmission, compact construction, extremely standardized hydraulic components
five). PTO system including: Gear pump, transfer, oil tank, vitta, ect.
six). Versatility, convenient procedure, fast mounting and dismounting

Unique Discover
1). It is employed for ditching in farms and grazing lands, CZPT pool, cleaning waterways as nicely as assistant excavating perform in construction and constructing streets.

2). Hydraulic transmission is used, featured with compact composition, flexibility, practical procedure and fast mounting and dismounting. It employs hydraulic oil frequently with tractor. The hydraulic factors are standardized, handy for operation and service.

3). To better accomplish different types of work, buckets of distinct sizes can be chosen and mounted on it.

All tractor which attached 3 piont hitch, PTO Shaft that can mounted on our self hydraulic method model backhoe.

All tractor which connected 3 point hitch, hydraulic output that can mounted on our typical design backhoe.

 

 

 

 

US $2,360-2,680
/ Piece
|
2 Pieces

(Min. Order)

###

After-sales Service: Online
Warranty: 1 Year
Type: Backhoe Loader
Usage: Special Excavator
Bucket: Backhoe
Transmission: Mechanical Transmission

###

Customization:

###

Model
BH-5
BH-6
BH-7
BH-8
BH-9
BH-10
BH-12
Fitting power
15-25hp
25-35 hp
35-75 hp
45-85hp
50-100hp
70-125hp
80-150hp
Max. digging depth
1650 mm
1850 mm
2150 mm
2640 mm
2900 mm
3000 mm
3500 mm
Digging depth Flat bottom
1450 mm
1600 mm
2000 mm
2500 mm
2760 mm
2800 mm
3350 mm
Max. digging height
2100 mm
2500 mm
3400 mm
3510 mm
3900 mm
4000 mm
4300
Loading heigh
1300 mm
1400 mm
1760 mm
2000 mm
2362 mm
2337 mm
2700
Unloading heigh
1530 mm
1733 mm
1878 mm
1952 mm
2413 mm
2540 mm
2770
Max. digging radius
2300 mm
2800 mm
3360 mm
3930 mm
3977 mm
3886 mm
4300
Bucket rofation (°)
160°
160°
160°
160°
160°
160°
172°
Swing angle (°)
160°
160°
160°
160°
160°
160°
180°
Valve standard press
16 Mpa
16 Mpa
16 Mpa
16 Mpa
16 Mpa
16 Mpa
16 Mpa
Bucket width
260 mm
300 mm
400 mm
450 mm
480 mm
500 mm
550 mm
Bucket volume
0.028 m3
0.03 m3
0.036 m3
0.048 m3
0.054 m3
0.06 m3
0.07 m3
Weight
340 kgs
520 kgs
550 kgs
610 kgs
720 kgs
850 kgs
930 kgs
US $2,360-2,680
/ Piece
|
2 Pieces

(Min. Order)

###

After-sales Service: Online
Warranty: 1 Year
Type: Backhoe Loader
Usage: Special Excavator
Bucket: Backhoe
Transmission: Mechanical Transmission

###

Customization:

###

Model
BH-5
BH-6
BH-7
BH-8
BH-9
BH-10
BH-12
Fitting power
15-25hp
25-35 hp
35-75 hp
45-85hp
50-100hp
70-125hp
80-150hp
Max. digging depth
1650 mm
1850 mm
2150 mm
2640 mm
2900 mm
3000 mm
3500 mm
Digging depth Flat bottom
1450 mm
1600 mm
2000 mm
2500 mm
2760 mm
2800 mm
3350 mm
Max. digging height
2100 mm
2500 mm
3400 mm
3510 mm
3900 mm
4000 mm
4300
Loading heigh
1300 mm
1400 mm
1760 mm
2000 mm
2362 mm
2337 mm
2700
Unloading heigh
1530 mm
1733 mm
1878 mm
1952 mm
2413 mm
2540 mm
2770
Max. digging radius
2300 mm
2800 mm
3360 mm
3930 mm
3977 mm
3886 mm
4300
Bucket rofation (°)
160°
160°
160°
160°
160°
160°
172°
Swing angle (°)
160°
160°
160°
160°
160°
160°
180°
Valve standard press
16 Mpa
16 Mpa
16 Mpa
16 Mpa
16 Mpa
16 Mpa
16 Mpa
Bucket width
260 mm
300 mm
400 mm
450 mm
480 mm
500 mm
550 mm
Bucket volume
0.028 m3
0.03 m3
0.036 m3
0.048 m3
0.054 m3
0.06 m3
0.07 m3
Weight
340 kgs
520 kgs
550 kgs
610 kgs
720 kgs
850 kgs
930 kgs

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft CollarThe power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.

Types

There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.

Connections

Shaft CollarA PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.

Safety

It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.

Maintenance

Shaft CollarOne of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China PTO Driven Tractor Backhoe     pto shaft bearingChina PTO Driven Tractor Backhoe     pto shaft bearing
editor by czh 2022-12-26