China 4cbm Sewage Tanker/ Fecal Suction Sewer Vacuum Truck pto shaft carrier bearing

Product Description

4cbm Sewage Tanker/ Fecal Suction Sewer Vacuum Truck 
 

HangZhou Chary Equipment CO., LTD
Call: 

Our firm will supply you the high high quality goods with a low value, quick delivery,and expert after-sale service.

 

1. Our 3-20CBM Bathroom Vacuum Force Sewer Vehicles mainly is composed of: PTO (Electricity Consider Off), Transmission shaft, vacuum pump, h2o and gas separator, oil and gas separator, multiple directional handle valve, hanger rod, sewage tanker, circulation valve, sucking gun, water tank, vacuum strain gauge and piping program, and many others.
2. Common steel (Carbon steel Q235 & Q345, also the Stainless steel can be choose) for the tank, towards corrosion resistant, rust protection and effectively-resisting.

three.The special parts of Bathroom Vacuum Strain Sewer Trucks optional h2o cycle vacuum pump are composed of electrical power get off, a transmission shaft, a water cycle pump, strain tank, hydraulic element, pipe line, vacuum stress gauge, amount gauge, and hand wishing gadget.

4.4000Liters Drilling Fluids Vacuum Truck with water cycle vacuum pump equips substantial electrical power vacuum suction pump, large quality hydraulic technique.

A casting tank, the tank head can open up, double cylinder dumping.

The soiled h2o can be dumped straight by means of the rear cover, has a high degree of vacuum (better than the feces vacuum truck), massive tonnage, large effectiveness, wide application.

 

 

 

HangZhou Chary Equipment CO., LTD
Phone: 

 

4cbm Sewage Tanker/ Fecal Suction Sewer Vacuum Truck 

 

Solution FOTON 4m3 fecal suction truck
Tank potential 4m3
Vacuumpipe 5 meters
Parameters Total dimension L/W/H (mm) 5950×2000×2630
  Suppress Mass(kg) 3900
  Approach / Departure angle(°) 23/15
  Entrance /rear overhang(mm) 1120/1470
  Gas Type Diesel
  Max Speed(km/h) ninety
Motor Sort N490QB
  Displacement(ml)/Electricity(kw) 2544/42
  Producer ZheJiang Quanchai Electrical power Co., LTD
  Emission regular Euro one
Transmission box 5Forward Gears 1 reverse gear
Chassis Generate position Remaining hand push
  Taxi One particular row
  Air condition Optional
  Drive variety 4×2
  Wheelbase(mm) 3360
  Tread(entrance/rear) 1415/1485
  Number of spring movies(entrance/rear) four/six

Multiple Delivery Techniques TO Help save Transport FREIGHT FOR YOU

HangZhou Chary Equipment CO., LTD
Phone: 

WHY Decide on US?

Encounter
ten a long time expertise of production,revenue,investigation and advancement in the discipline of particular vehicles.

Specialization
We can generate in accordance to your demand from customers, the content,the dimension, the coloration and the brand is optional for you.

Good top quality
Has solid technologies, superior equipments Reliant quality and flexible modes of procedure also have rigorous good quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with SGS,BV certifcate as effectively.

Chassis offer
We have a very very good extended phrase cooperation connection with chassis producer, These kinds of as SINOTRUK, BEIBEN, FAW, FOTON, IVECO, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.

OUR Services

(1) A lot more than 300 personnel ,large and innovative production 
(2) Have skilled engineer,can provide the best solutions
(3) With maintaining good relation with SINOTRUK, FOTON, ISUZU, DFAC, FOTON, CZPT chassis factory.
(4) Construct strict QC staff to promise the good quality
(5) Very own very good sales group, can supply heat comply with-up support.
(6) Spare Components Provide:
We have our personal spear areas departments,have robust creation and distribution capability. We can satisfy your desire inside of 2-7 times. We constantly do our ideal to remedy the troubles, and put our customers’ pursuits in the very first location. And We can Source Spare Areas For Several Brand names, This kind of as SINOTRUK, BEIBEN, FAW, FOTON, IVECO, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.

HangZhou Chary Machinery CO., LTD
Call: 

HangZhou Chary Machinery CO., LTD
Contact: 

FAQ

1, How to acquire the trailer truck from your firm?
You can choose the model from our internet site, also you can notify our product sales manger your specific demands and we will recommend the ideal product to you. Following confirming the product and value, we can sign the deal.
 
two,How to make certain merchandise good quality?
To begin with,we passed the worldwide top quality program certification. Next, Produced in China Team has executed field certification for our manufacturing unit. Finally,You can entrust third party people or organizations to examine our merchandise prior to shipping and delivery.
 
three, How to visit your factory? 
Right after you arriving at China, you can fly to HangZhou airport. HangZhou airport is positioned in HangZhou Metropolis, ZheJiang Province. Our driver will meet you at HangZhou airport and consider you to our factory by auto.

FOTON 4m3 Fecal Suction Truck/ Sewage Suction Truck/ Vacuum Suction Sewage Truck

WELCOME TO Speak to US

If you are interested in any of development equipment for sale,make sure you come to feel totally free to make contact with me. Also, welcome to China and visit our construction machinery factory for design machinery price or to talk about more information.

HangZhou Chary Machinery CO., LTD
Phone: 
   

 

US $13,700-16,500
/ unit
|
1 unit

(Min. Order)

###

Type: Fecal Suction Truck
Load Capacity: 4T
Certification: ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949
Wheel Base: 3360
Tread: 1820mm
Grade: Light Duty

###

Customization:

###

Product FOTON 4m3 fecal suction truck
Tank capacity 4m3
Vacuumpipe 5 meters
Parameters Overall dimension L/W/H (mm) 5950×2000×2630
  Curb Mass(kg) 3900
  Approach / Departure angle(°) 23/15
  Front /rear overhang(mm) 1120/1470
  Fuel Type Diesel
  Max Speed(km/h) 90
Engine Type N490QB
  Displacement(ml)/Power(kw) 2544/42
  Manufacturer Anhui Quanchai Power Co., LTD
  Emission standard Euro 1
Transmission box 5Forward Gears 1 reverse gear
Chassis Drive position Left hand drive
  Cab One row
  Air condition Optional
  Drive type 4×2
  Wheelbase(mm) 3360
  Tread(front/rear) 1415/1485
  Number of spring films(front/rear) 4/6+7
  Tire Type 6.50-16
Equipment
 
Equipped with vacuum pump, anti-overflow valve ,
 oil-water separator power take off, transmission shaft, fecal tank, pipe network, fecal pipe for observing and cleanout equipment
Time for full suction less than 5min
US $13,700-16,500
/ unit
|
1 unit

(Min. Order)

###

Type: Fecal Suction Truck
Load Capacity: 4T
Certification: ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949
Wheel Base: 3360
Tread: 1820mm
Grade: Light Duty

###

Customization:

###

Product FOTON 4m3 fecal suction truck
Tank capacity 4m3
Vacuumpipe 5 meters
Parameters Overall dimension L/W/H (mm) 5950×2000×2630
  Curb Mass(kg) 3900
  Approach / Departure angle(°) 23/15
  Front /rear overhang(mm) 1120/1470
  Fuel Type Diesel
  Max Speed(km/h) 90
Engine Type N490QB
  Displacement(ml)/Power(kw) 2544/42
  Manufacturer Anhui Quanchai Power Co., LTD
  Emission standard Euro 1
Transmission box 5Forward Gears 1 reverse gear
Chassis Drive position Left hand drive
  Cab One row
  Air condition Optional
  Drive type 4×2
  Wheelbase(mm) 3360
  Tread(front/rear) 1415/1485
  Number of spring films(front/rear) 4/6+7
  Tire Type 6.50-16
Equipment
 
Equipped with vacuum pump, anti-overflow valve ,
 oil-water separator power take off, transmission shaft, fecal tank, pipe network, fecal pipe for observing and cleanout equipment
Time for full suction less than 5min

What Is a PTO Shaft?

A PTO shaft is a component that is important for a power take-off (PTO) tractor. There are many different kinds of PTOs, including Italian, German, and North American types. The types are categorized into different series, which will have different features such as bearing diameter, cap-to-cap length, and snap rings.
Shaft Collar

Power Take-Off (PTO) shaft

A PTO shaft is a high-speed working shaft that provides torque and lift. This is an advantage for machines that lift and lower loads and are often used on construction sites. Often, the operating elements are located outside of the operator’s cabin. A safety system is also present that allows the PTO shaft to automatically disengage if it is not turned on.
A safety retaining band 12 is used to secure the PTO shaft. The retaining band extends axially from the PTO shaft S and includes a hinge. The band may be adjustable in width to ensure a correct clearance from the PTO shaft. If necessary, it may also be secured with a conventional over-center clamp.
The power-take-off (PTO) shaft is a crucial part of a tractor. Understanding how power is transferred from the tractor’s engine to the implement requires a better understanding of how this shaft works. The torque and speed of the PTO shaft is essential to developing and utilizing the power of the tractor. There are many ways to measure torque and speed at the PTO shaft, including using a telemetry or encoder system.
A Power Take-Off (PTO) shaft safety retainer is an inexpensive, dependable, and fully effective device that protects the PTO shaft from entanglement. Its effectiveness will become clear after reading the specification. A power take-off shaft safety retainer is not difficult to install and is a good choice for many applications.
PTO shafts have a dangerous tendency to separate from the driven machinery. This poses a safety hazard because the PTO shaft can continue to whip around while the operator is driving the machine. Additionally, it can be very difficult for the operator to reach the power plant when operating PTO-driven equipment.

Safety chain

The safety chain on your PTO shaft is an important component of your tractor’s safety system. A properly guarded PTO can prevent entanglement with people, tools, and objects. Moreover, it reduces the risk of the PTO shaft becoming detached from the tractor. It also prevents people from stepping over the rotating shaft.
When not guarded, a PTO shaft is extremely dangerous. It can cause serious injuries and even death. Proper safety chains can prevent this from happening and protect livestock from damage to the PTO shaft. If you’re looking to purchase a safety chain for your PTO shaft, be sure to get one that fits tightly.
When properly attached, a safety chain can keep the shaft from swinging when the PTO is engaged. A 540-rpm PTO shaft will make more than two complete revolutions in less than five seconds. That means it can wrap someone in five tenths of a second. And if you try to pull away, you’ll get wrapped even tighter!
Another reason to use a safety chain is to prevent injury from clothing getting caught in the drive shaft. A jacket or a sweater can entangle itself around the PTO shaft and cause a serious injury. The clothing can also trap the injured limb against the shaft. Hence, the chain should be removed as soon as possible after the operation is completed.
A safety chain is an essential part of your tractor’s safety system. It prevents an accident from happening because of improper maintenance. A poorly maintained PTO shaft can result in severe injuries or even death. Properly installed and maintained safety chain can help you prevent any kind of PTO shaft accident.
Shaft Collar

Universal joint

A bad universal joint can cause a number of problems for your tractor or implement. These issues may include squeaking or clunking noises when you shift gears, or a shuddering sensation when you brake. If you notice any of these symptoms, it is best to take your vehicle to a mechanic right away for a thorough inspection. If not fixed properly, a bad universal joint can separate from the drive shaft and cause major damage to the tractor or implement.
In order to choose the proper universal joint, you must consider the size of your PTO shaft. Some implements have a diameter of 14 inches or more from the hitch point to the end of the input shaft. The longer distance helps prevent the PTO shaft from bottoming out when making sharp turns. It also prevents the two parts of the shaft from detaching during cornering.
Universal joints are used in agricultural and forestry equipment and other vehicles with large number of rotors. They can be made of different materials. The most common is steel or stainless steel. This material can last for many years. A universal joint is an excellent option for small tractors, lawn mowers, and other agricultural equipment.
The universal joint is also very useful when coupling or extending drive lines. It comes with 2 yokes and a cross kit. The yokes measure 6 x 13/8″ spline, while the cross kit measures 30,2 x 92 mm. The universal joint is made to withstand extreme temperatures. It can be easily disassembled and serviced if necessary.

Square rigid shaft

Torsion is a property of a mechanical system that is affected by changes in torsional rigidity. Torsional rigidity is measured as the torque needed to twist one unit of angular measurement over one unit of length. A shaft with high torsional rigidity will provide a stable mechanical interface.
Different shafts may have different types of collars. The most basic one is a sleeve, which is composed of a thick tube with the same diameter as the shaft. The sleeve is attached to each end of the shaft and has threaded inserts to prevent longitudinal movement.
The PTO shaft also has a safety shield on both ends. It helps to prevent accidents by securing equipment to the tractor. It can be found in domestic and metric shapes. The domestic versions are generally round and domestic shaped, while metric versions are available in a bell, football, star, and metric shape.
An CZPT coupling consists of three pieces: a center plastic disc, two encompassing discs, and a flange. These parts are joined together with a ring that is screwed to the shaft. Some couplings feature oil injection points on the coupling. These can supply oil under pressure to the coupling’s annular grooves. This helps it ‘float’ and aids in the removal.
Another type of flexible coupling is the universal joint. These couplings can be made from a variety of materials, such as rubber, braided metal wire, or woven wire. They can be fabricated to withstand various misalignments. But, unlike rigid couplings, flexible couplings are susceptible to shock and vibration.
Shaft Collar

Economy PTO

Economy PTO shafts are designed to reduce the overall torque and power consumption of a tractor. They can be manually adjusted to engage and disengage the PTO. The cab mounted control/monitoring unit 14 has a switch 19 that selects between the economy and normal driving modes of the PTO. Using the economy mode decreases the engine rpm while using a lower gear ratio to drive the PTO shaft.
Economy PTO shafts come in hydraulic and mechanical versions. Both types are suitable for agricultural tractors. They allow the tractor to operate at a lower rpm, which reduces noise and vibration. They can also be used in a wide range of equipment. The transmission PTO is the oldest type, and is directly connected to the transmission. When the clutch is engaged, it drives the transmission.
Standard PTO shafts are available in various diameters, splines, and speeds. Many implements are designed to be compatible with one or more of these types of PTO shafts. The domestic versions come with a splined front shaft and a square, rectangle, or round secondary shaft.
Another difference between the two types is the number of teeth on the toothed wheel. The economy PTO allows the tractor to run at a lower rpm than the standard PTO. The engine rpm can go as low as 1600 while using the economy PTO. It also helps to reduce noise and vibration in the cab.
The present invention solves these issues and provides an increased level of automation and operator awareness of the PTO function. It also includes a system for detecting the type of PTO shaft and automatically setting the parameters of the control routine.
China 4cbm Sewage Tanker/ Fecal Suction Sewer Vacuum Truck     pto shaft carrier bearingChina 4cbm Sewage Tanker/ Fecal Suction Sewer Vacuum Truck     pto shaft carrier bearing
editor by czh 2023-01-04